? coilcraft, inc. 2010 specifications subject to change without notice. please check our website for latest information. shielded power inductors C lps6225 series document 554-1 document 554-1 revised 03/12/10 dcr srf i sat (a) 5 i rms (a) 6 inductance 2 max 3 typ 4 10% 20% 30% 20c 40c part number 1 20% (h) (ohms) (mhz) drop drop drop rise rise lps6225-122ml_ 1.2 0.040 178 5.3 5.4 5.4 1.1 1.65 lps6225-222ml_ 2.2 0.045 100 3.9 4.0 4.1 1.0 1.40 lps6225-332ml_ 3.3 0.055 68 3.5 3.5 3.6 1.0 1.35 lps6225-472ml_ 4.7 0.065 53 3.0 3.1 3.2 0.90 1.30 lps6225-682ml_ 6.8 0.095 40 2.6 2.7 2.8 0.90 1.30 lps6225-103ml_ 10 0.105 35 2.1 2.1 2.2 0.90 1.30 lps6225-153ml_ 15 0.135 23 2.1 2.2 2.2 0.85 1.20 lps6225-223ml_ 22 0.175 17 1.4 1.5 1.6 0.80 1.10 lps6225-333ml_ 33 0.260 14 1.1 1.2 1.2 0.65 0.90 lps6225-473ml_ 47 0.360 10 0.98 1.0 1.0 0.60 0.80 lps6225-683ml_ 68 0.420 9.6 0.58 0.61 0.62 0.57 0.74 lps6225-104ml_ 100 0.610 7.7 0.48 0.51 0.52 0.47 0.64 lps6225-124ml_ 120 0.750 7.4 0.42 0.45 0.46 0.43 0.58 lps6225-154ml_ 150 0.920 6.4 0.39 0.41 0.42 0.40 0.54 lps6225-224ml_ 220 1.30 5.0 0.32 0.34 0.35 0.37 0.50 lps6225-334ml_ 330 2.00 3.8 0.26 0.27 0.28 0.28 0.39 lps6225-474ml_ 470 2.60 3.2 0.22 0.23 0.24 0.24 0.37 lps6225-684ml_ 680 4.00 2.8 0.18 0.19 0.20 0.18 0.26 lps6225-105ml_ 1000 6.00 2.3 0.15 0.16 0.17 0.15 0.24 lps6225-155ml_ 1500 9.00 1.8 0.12 0.13 0.13 0.13 0.20 lps6225-185ml_ 1800 11.7 1.7 0.11 0.12 0.12 0.11 0.14 lps6225-225ml_ 2200 13.5 1.3 0.10 0.10 0.11 0.11 0.13 lps6225-335ml_ 3300 21.0 1.1 0.099 0.10 0.11 0.080 0.11 lps6225-475ml_ 4700 30.0 0.90 0.086 0.096 0.10 0.075 0.090 lps6225-565ml_ 5600 36.0 0.72 0.083 0.090 0.096 0.070 0.090 lps6225-685ml_ 6800 43.0 0.70 0.080 0.086 0.089 0.065 0.080 lps6225-825ml_ 8200 54.0 0.69 0.079 0.086 0.088 0.060 0.075 lps6225-106ml_ 10000 70.0 0.68 0.075 0.084 0.087 0.060 0.065 designer?s kit c349 contains 3 each of all values core material ferrite core and winding loss see www.coilcraft.com/coreloss terminations rohs compliant silver-palladium-platinum-glass frit. other terminations available at additional cost. weight 309 ? 331 mg ambient temperature ?40c to +85c with i rms current, +85c to +125c with derated current storage temperature component: ?40c to +125c. packaging: ?40c to +80c resistance to soldering heat max three 40 second reflows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited floor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging 750/7 reel; 2500/13 reel plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 2.57 mm pocket depth recommended pick and place nozzle od: 6.2 mm; id: 3.1 mm pcb washing only pure water or alcohol recommended ? low dcr; high current; shielded construction ? perfect for backlight applications 1. please specify termination and packaging codes: lps6225-106m lc termination: l = rohs compliant silver-palladium- platinum-glass frit. special order: t = rohs tin-silver-copper (95.5/4/0.5) or s = non-rohs tin-lead (63/37). packaging: c =7 machine-ready reel. eia-481 embossed plastic tape (750 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. d =13 machine-ready reel. eia-481 embossed plastic tape. factory order only, not stocked (2500 parts per full reel). 2. inductance tested at 100 khz, 0.1 vrms, 0 adc. 3. dcr measured on a micro-ohmmeter. 4. srf measured using agilent/hp 8753es or equivalent. 5. dc current that causes the specified inductance drop from its value without current. 6. current that causes the specified temperature rise from 25c ambient. 7. electrical specifications at 25c. refer to doc 362 ?soldering surface mount components? before soldering.
? coilcraft, inc. 2010 specifications subject to change without notice. please check our website for latest information. shielded smt power inductors C lps6225 series document 554-2 document 554-2 revised 03/12/10 typical l vs current typical l vs frequency 0.236 0.003 6,00 0,076 0.236 0.003 6,00 0,076 0.094 0.004 2,40 0,10 winding direction dash number internal code xxx x 0.167 4,25 0.167 4,25 0.079 2,00 0.079 2,00 0.260 6,60 0.260 6,60 0.071 1,80 * * dimensions are of the case not including the termination. for maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. * recommended land pattern 0.165 4,20 0.165 4,20 0.039 1,00 typ typ 0.039 1,00 1 10 10000 1000 100 0.01 0.1 110 current (a) inductance (h) 10 h 33 h 1000 h 3300 h 330 h 100 h 1 10 10000 1000 100 0.01 0.1 110 frequency (mhz) inductance (h) 10 h 33 h 1000 h 3300 h 330 h 100 h current derating -40 -20 0 20 40 60 80 100 140 120 ambient temperature (c) percent of rated current 120 110 100 90 80 70 60 50 40 30 20 10 0 i sat i rms 25c dimensions are in inches mm
|
